CureSmart™ 2D
|
CureSmart™
Find out how CureSmart™ works, and how it can improve your curing and coating processes.
CureSmart™ 2D
For curing flat objects, recessed profiles, silk screen.
CureSmart™ 3D
For curing wires, large diameter plastic tubing, bottles, small intricately shaped objects.
|
|
 |
CureSmart™ 3D
Similar to CureSmart™ 2D but with door for inserting parts into chamber.
- For curing small, intricately shaped objects
- Uniform irradiance within volume of chamber
Advantages over other 3D systems:
- Lambertian rays — UV light is incident on your part from all directions, rather than from a single direction. Lambertian UV gets into places that were hard or impossible to reach with conventional methods
- Uniform irradiance — conventional 3D systems commonly overcure and even damage some areas of your part, while others are undercured
Laboratory unit: 18" x 18" x 24"
CureSmart™ 3D System Specifications
| |
CS-1824-3D |
| Curing chamber inside dimensions (in) |
18"W x 18"D x 24"H |
| Lamp |
F300, F600 or up to 14" arc |
UVB irradiance at center of chamber
(W/cm2 of 280 - 320 nm) |
2.8 W/cm2 |
Uniformity inside chamber
(Emin/Emax within area bound by 90% of chamber inside dimensions) |
98% |
|
|
|
